PSG COLLEGE OF TECHNOLOGY

CENTRE OF EXCELLENCE IN WELDING ENGINEERING AND TECHNOLOGY

Project Funded by

MINISTRY OF HEAVY INDUSTRIES & PUBLIC ENTERPRISES, GOVERNMENT OF INDIA


Purpose

• signal analyzer measures and monitors complex RF and microwave signals. Analog baseband analysis is available on MXA. The analyzer integrates traditional spectrum measurements with advanced vector signal analysis to optimize speed, accuracy, and dynamic range. The analyzer has Windows 7® built in as an operating system.

Description

• 10 Hz to 26.5 GHz frequency range, Up to 160 MHz analysis bandwidth Frequency, power, modulation, distortion & noise Spectrum monitoring.

Spurious emissions, Scalar network analysis, Perform deeper troubleshooting with the 89600 VSA software.

Make: Keysight Technologies

Model No: N9020A

Made in Thailand


Purpose

• Accurate, Fast measurement speed, 20 Hz to 300 kHz/500 kHz/1 MHz test frequency with 4-digit resolution at any frequency 16 impedance parameters, 100 μV to 2 Vrms, 1 μA to 20 mA variable test signals, Auto-level control 201 points of programmable list sweep, DC resistance Six convenient display modes

Description

• precision LCR meter provides the best combination of accuracy, speed, and versatility for a wide range of component measurements. Offering fast measurement speed and outstanding performance at both low and high impedance ranges, the E4980AL is the basic tool for general R&D.

Make: Keysight Technologies

Model No: E4980AL

Made in Malaysia


Purpose

• Making measurements of gain, phase, voltage verses frequency response. To plot the bode plots or transfer function. Also used to obtain Loop gain, phase shift, Open loop band width, base margin and Output impedance

Description

• Frequency Range: 10µHz to 5, 20 or 40MHz (sine wave)10µHz to 1MHz (square wave) AC Amplitude: 1mV to 10V, DC Bias ±10V, 10mV Steps, Modes: Single Frequency, sine sweep, and linear sweep steps, Log Sweep 0.1 – 2000 Steps per decade 10µHz – 5MHz step, Output Impedance: Switchable 50 ohms/2 ohms,

Make: Venable Instruments

Model No: Venable 350c

Made in USA


Purpose

• PCB prototyping machine can mill various types of the boards from normal circuit boards to extremely thin circuit boards.

Description

• Spindle speed 62,000rpm,10 Auto Tool Change, Working Area: 229x300 mm

Minimum width of the line 0.1(4mill), Camera Monitoring System, Time saving of product development, and Processing without chemicals

Make: MITS

Model No: APLAB

Made in japan


Purpose

• The Fluke 435-II make it the ideal tool for both power quality troubleshooting and discovering energy savings checking the performance of motors and generators, Frontline Troubleshooting, Long-Term Analysis, Load Studies, Power Wave Data Capture, Power Inverter Efficiency, Energy Monetization, Energy Assessment and Predictive Maintenance

Description

• The Fluke 435 Series II Power Quality and Energy Analyzer that can monetize the cost of energy waste due to poor power quality. the wide range of measurement functions and measurement methods, Vrms (AC + DC):1 V to 1000 V phase to neutral, Vpk :1 Vpk to 1400 Vpk, Amps (AC + DC) i430-Flex 1x :5 A to 6000 A, i430-Flex 10x: 0.5 A to 600 A,

Make: 435 Series II

Model No: fluke

Made in USA